Advancement of cracks is the main goal of this device. During new construction, cut gaps or internally regulated seams that were designed and built on horizontally hardened concrete are covered with this product. Because of motorized traffic, this product prevents slat armour of joint surfaces. The high load diameter for flooring installations that will be subject to strongly loaded vehicle traffic is 3/4 inch, and for best performance, the junction thickness should be at least three times as broad.
The greater detail can be reduced to 1/2 in for foot traffic (13 mm). Joint movement from temperature changes is constrained, thus it may be applied outside. prevents dirt from accumulating in joints and provides a surface for applying pressure that is appropriate for use in USDA-approved facilities.Click herehttps://atcepoxy.com/products/crack-injection-water-stops/crack-kit-concrete-repair-epoxy-kit/ for more updates.
Specifications
It is a two-component polyurea joint filler intended for heavy use and refrigeration applications. Because of its reduced density and auto levelling construction, it is flexible, free of solvents, and able to shift by 10 to 15 percentage points of the predetermined joint width. This item cannot be used when moist because of its extraordinary sensitivity to humidity. Products from Adhesives Technology Corp. (ATC) are available online and via a select group of distributors, and they cover all of your construction needs. This Technical Data Sheet contains the Company’s Published Installation Guide (MPII) (TDS). Always check the most recent MPII usage.
An individual utilizing a topcoat is solely responsible. To make sure compatibility and functioning, it is advisable to do a preliminary test on a small test area. Topcoat discoloration or failed adhesion might be brought on by incompatibility. Wear protective clothing at all times, including gloves and safety glasses. To remove uncured materials from tools and equipment, use a mild solvent. For cured material, only mechanical removal is feasible.
Throughout the curing process, color alterations occur in exterior applications. The substrate and the surrounding area must be completely dry with no moisture present before applying crack kit. A product should not be stored once it has been opened since exposure to moisture drastically reduces shelf life.
